QuickSiteCalc

Home › Stair Calculator

Stair Calculator

Stair layout from the total rise — step count, actual riser, tread depth, total run and stringer length.

Type your numbers — the result updates live.

No cost line here — this one is geometry / sizing, not a material quantity. Cost depends on the material and installer you choose.

Formula

Steps = total rise ÷ 7.5 in, rounded  ·  Actual riser = total rise ÷ steps  ·  Tread = 25 in − (2 × riser), from the 2R + T = 25 in comfort rule  ·  Total run = tread × (steps − 1)  ·  Stringer = √(total run² + total rise²)

Solved example

96 in total rise ÷ 7.5 in target riser = 13 steps. Actual riser = 96 ÷ 13 = 7.38 in; tread = 25 − (2 × 7.38) = 10.23 in; total run = 10.23 × 12 = 122.8 in; stringer ≈ 13 ft; stair angle 35.8°.

FAQs

What is the 2R + T rule?

A long-used stair comfort rule: twice the riser height plus the tread depth should total about 24–25 in. This calculator uses 25 in, so once the riser is set by the step count, the tread follows from it.

Are these dimensions legal everywhere?

No — building codes set riser and tread limits; common US residential rules cap the riser at 7¾ in and require treads at least 10 in deep. Treat this as a layout estimate and check your local code before cutting stringers.

Why is the total run one tread short?

The top 'step' is the upper floor itself, so a flight has one fewer tread than it has risers — the run counts only the treads you actually build.