Home › Deck Calculator
Decking boards and joists for a deck — the boards run along the length, so the board count comes from the width.
Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.
Boards = deck width in inches ÷ 5.75 (5.5 in board + ¼ in gap), rounded up · Linear feet = boards × deck length · Joists = (deck length in inches ÷ joist spacing), rounded up, + 1
12 × 10 ft deck: 120 in of width ÷ 5.75 in per board = 21 boards of 12 ft = 252 linear ft. With 10% waste: 277.2 linear ft — order 24 boards. Joists at 16 in spacing: 10.
This calculator runs the boards along the deck length, so the count comes from the width. If your design runs the boards across instead, swap the length and width you enter.
Standard 5.5 in wide deck boards with a ¼ in gap — 5.75 in of coverage per board. Wider boards, or a bigger gap for drainage, change the count.
No — decking boards and joists only. Beams, posts, footings, ledger and fasteners are separate; the post hole calculator can figure the concrete for the footings.