QuickSiteCalc

Home › Hardwood Floor Refinishing Cost Calculator

Hardwood Floor Refinishing Cost Calculator

What sanding and refinishing a hardwood floor should cost — figured on the floor area and rate per square foot, with stairs priced per step.

Type your numbers — the result updates live.

Price is an editable estimate — change it to your supplier's price. There is no waste factor on this one: the quantity is bought by the bag, so the bag count is simply rounded up. Estimate only, not a quote.

Formula

Refinishing cost = floor area (sq ft) × price per sq ft  ·  Stairs cost = number of steps × price per step  ·  Total = refinishing cost + stairs cost  ·  Typical refinishing rates run about $3–$6 per sq ft — an estimate, not a quote

Solved example

500 sq ft of floor at $4.50 per sq ft = $2,250, with no stairs. Add 10 stair steps at $30 per step and the stairs cost $300 — a total of $2,550.

FAQs

Why are stairs priced per step instead of per square foot?

Stairs are hand work: every tread is sanded, edged and coated individually, and the nosing has to be worked by hand, so a flat per-square-foot rate does not capture the labour. Per-step pricing — roughly $25–$40 a step is typical — is how refinishers actually quote stairs, which is why this calculator keeps them separate from the floor area.

What moves the per-square-foot rate up or down?

The finish you choose, a stain colour change, board repairs, and how worn the floor is to start with. A straightforward sand-and-coat in the same colour sits at the low end of the typical $3–$6 range; dark stains, repairs and extra coats push toward the top. Every figure here is an estimate — change the rate to a quote you actually get.

Can every wood floor be refinished?

No. Solid hardwood can usually be sanded several times over its life, but engineered flooring has only a thin wear layer — some products can take one light sanding, some none at all — and laminate cannot be refinished at all. If you are not sure what you have, check the edge at a floor vent or threshold for the wear layer's thickness before booking anyone.