QuickSiteCalc

Home › BTU Calculator

BTU Calculator

Heating and cooling size for a room — BTU per hour, AC tons and the closest common mini-split size.

Type your numbers — the result updates live.

No cost line here — this one is geometry / sizing, not a material quantity. Cost depends on the material and installer you choose.

Formula

BTU/hr ≈ room area (sq ft) × 30 × (ceiling height ÷ 8) × insulation factor (poor 1.25 · average 1.0 · good 0.8)  ·  AC tons = BTU ÷ 12,000  ·  This is a rough sizing estimate using 30 BTU per sq ft for a standard 8 ft ceiling — a full Manual J load calculation is the accurate method

Solved example

12 × 10 ft room with 8 ft ceilings and average insulation: 120 sq ft × 30 = 3,600 BTU/hr = 0.30 tons — the smallest common mini-split size, 9,000 BTU, covers it.

FAQs

How accurate is the 30 BTU per sq ft rule?

It is a rough planning estimate for a typical room. Sun exposure, window area, climate, occupancy and ceiling height all move the real load — a Manual J calculation by an HVAC contractor is the accurate method to use before buying equipment.

What is a ton of air conditioning?

One ton = 12,000 BTU/hr of cooling capacity. A 3,600 BTU room like the example is 0.30 tons — most homes need 1.5 to 5 tons in total, figured room by room or by a whole-house load calculation.

Should I just round up to a bigger unit?

Only to the nearest common size. An oversized air conditioner short-cycles — it cools the air fast, shuts off, and leaves the room clammy because it never runs long enough to pull out humidity.