Home › Blown-In Insulation Calculator
Blown-in insulation for an attic floor — bags of blown fiberglass or cellulose to hit a target R-value, figured from the manufacturer's bag coverage chart.
Price is an editable estimate — change it to your supplier's price. There is no waste factor on this one: the quantity is bought by the bag, so the bag count is simply rounded up. Estimate only, not a quote.
Bags = area (sq ft) ÷ coverage per bag for the material and target R-value, rounded up · Coverage follows the manufacturer's bag chart (blown fiberglass: R-13 ≈ 169.8 sq ft per bag · R-30 ≈ 68.5 · R-49 ≈ 39.9 · R-60 ≈ 31.8 — cellulose, 19 lb bags: R-13 ≈ 56.0 · R-30 ≈ 21.7 · R-49 ≈ 12.0 · R-60 ≈ 9.3) — the chart printed on the bag you buy is the one that decides · Settled depth ≈ target R ÷ 2.75 for fiberglass, ÷ 3.5 for cellulose
A 1,000 sq ft attic in blown fiberglass at R-49: 1,000 ÷ 39.9 sq ft per bag = 25.1 → 26 bags, blown to a settled depth of about 17.8 in — about $936 at $36 per bag. The same attic in cellulose at R-38: 1,000 ÷ 16.4 = 61 bags — about $976 at $16 per bag.
A bag of cellulose is much denser than a bag of blown fiberglass, so it covers far less area at the same R-value — but each bag costs much less, which is why the two totals in the example land close together. What matters is the cost per square foot at your target R, not the bag count on its own.
The coverages come from the manufacturers' published bag charts (Owens Corning AttiCat for blown fiberglass, GreenFiber for the 19 lb cellulose bags). Every brand prints its own chart on the bag, and coverage falls as the target R-value rises — if the chart on your bag differs from the figures here, your bag's chart wins. Blown depth also settles a little over time, which the charts already allow for.
Many US climate zones call for R-38 to R-60 in attics, with colder zones aiming at R-49 or more — check your local energy code for the target in your zone. If you are topping up insulation that is already there, the attic insulation calculator figures the bags to add from your current R-value.
Yes — blown insulation goes in with a blower machine. Home centres commonly rent the blower free or cheap with a minimum bag purchase, and two people make the job fast: one feeding the hopper, one on the hose watching the depth markers.