QuickSiteCalc

Home › Fence Post Depth Calculator

Fence Post Depth Calculator

How deep a fence post hole should be, and what post length to buy — from the fence height and your local frost depth.

Type your numbers — the result updates live.

No cost line here — this one is geometry / sizing, not a material quantity. Cost depends on the material and installer you choose.

Formula

Hole depth = the GREATER of (above-ground fence height ÷ 3) or (local frost depth + 6 in)  ·  Post length = fence height + hole depth  ·  The extra 6 in puts the post base and a gravel bed under it below the frost line — enter your local frost line depth; if you do not know it, your building department publishes it

Solved example

A 6 ft fence stands 72 in above ground. One-third rule: 72 ÷ 3 = 24 in. Frost rule: 36 in frost depth + 6 in = 42 in — the frost rule wins, so dig 42 in deep. Post: 72 + 42 = 114 in (9.5 ft) → buy a 10 ft post.

FAQs

Where do I find my local frost depth?

Your local building department or building code publishes the frost line for your area — it ranges from a few inches in warm southern states to 60 in or more in the far north. It is the single most important number in this calculator, so look it up rather than guessing.

Why must the post go below the frost line?

Water in soil expands as it freezes. If the post base sits above the frost line, that expanding soil — frost heave — can jack the post up a little more every winter, leaving the fence leaning and uneven. Below the frost line the ground does not freeze, so the post stays put.

How wide should the hole be?

About three times the post width is a common rule — roughly 12 in across for a 4×4 post. The concrete for a hole that size is figured by the post hole calculator.