Home › Paling Fence Calculator
Palings for a timber paling fence — the paling count, posts and rails from the fence length, paling width and the gap between palings. Metric-first, with a feet option for the length.
Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.
Paling spacing = (paling width + gap) in mm ÷ 1,000 · Palings = fence length (m) ÷ spacing, rounded up · Posts = fence length ÷ 2.4 m, rounded up, + 1 (posts at most 2.4 m apart) · Rails = 2 × fence length (a top and a bottom rail)
A 10 m fence with 100 mm palings and a 10 mm gap: spacing 0.11 m, so 10 ÷ 0.11 = 91 palings — about $409.50 at $4.50 each. With 10% waste: 101 palings, about $454.50. Posts: 6. Rails: 20 m in total.
Around 10 mm is a common starting point — timber shrinks as it dries, so palings butted tight on day one usually open up small gaps anyway. Overlapped or double-layered privacy styles close the gap completely but use roughly twice the palings, and are not what this calculator figures.
This calculator spaces posts at most 2.4 m apart, a common maximum for a standard paling fence — but the right spacing depends on the fence height, the wind it catches and your soil. Post spacing and fence heights must suit your local standards and soil conditions, so confirm both before you dig.
No — the cost line is palings only, at the price per paling above, and prices are editable estimates. Posts, rails, concrete and fasteners are extra; the post count and rail length are shown in the result so you can price them from the same numbers.
Treated pine is the cheaper, lighter standard in Australia and takes stain or paint well; hardwood palings cost more, are heavier, and weather to a silver-grey if left uncoated. Both are counted exactly the same way here — only the price per paling changes.