QuickSiteCalc

Home › Paver Calculator

Paver Calculator

Pavers for a patio or walkway — the count by paver size, plus the compacted gravel base and bedding sand that go underneath them.

Type your numbers — the result updates live.

Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.

Formula

Pavers = area (sq ft) × pavers per sq ft (4×8 in = 4.5 · 6×6 in = 4.0 · 6×9 in = 2.67 · 12×12 in = 1.0)  ·  Base gravel = area × 4 in ÷ 12 ÷ 27 (cubic yards, for a 4 in compacted base)  ·  Bedding sand = area × 1 in ÷ 12 ÷ 27 (cubic yards)

Solved example

A 100 sq ft patio with 4×8 in pavers: 100 × 4.5 = 450 pavers — with 10% waste, 495. Underneath go 1.23 cubic yards of base gravel (100 × 4/12 ÷ 27) and 0.31 cubic yards of bedding sand. The pavers themselves at $0.85 each: 450 × $0.85 = $382.50 base.

FAQs

How many pavers do I need per square foot?

It depends on the paver size: a 4×8 in brick paver takes 4.5 per sq ft, a 6×6 in takes 4.0, a 6×9 in about 2.67, and a 12×12 in exactly 1. The joints between pavers are narrow, so the count comes straight from the face size.

How deep should the base under pavers be?

This calculator figures the standard patio build: 4 in of compacted gravel with a 1 in bedding sand layer screeded on top. A driveway needs a deeper base — typically 6 in or more — because it carries vehicles, so scale the gravel figure up for vehicle areas.

Does this include joint sand and edging?

No — the result is pavers, base gravel and bedding sand. The sand that fills the joints between the pavers is figured by the polymeric sand calculator, and edge restraints are bought by the length of the patio's exposed edges.