Home › Interior & Finishing Calculators
Finishing jobs are measured by the square foot but sold by the sheet, roll, bag and box — and every cut wastes a little material. These calculators turn room measurements into drywall sheets, joint compound, paint gallons, wallpaper rolls, tile counts, grout and thinset bags, flooring boxes, carpet by the square yard with its installed cost, carpet cleaning and hardwood refinishing estimates, ceiling tiles by the room, and countertop square footage, each with a waste allowance for cuts, pattern matching and mistakes.
Drywall sheets for a room — walls, the ceiling, or both, in 4×8 or 4×12 sheets, plus a rough compound estimate.
Joint compound for taping and finishing drywall — gallons and buckets from the total drywall area.
Paint for a room's walls — gallons by room size and coats, with doors and windows taken out. Ceiling not included.
Wallpaper rolls for a room — wall area from the room size and ceiling height, minus doors and windows.
Tiles for a floor or wall — pick your tile size and get the tile count and boxes to buy.
Grout for a tile floor or wall — 25 lb bags from the area, tile size and joint width.
Mapei grout for a tile floor or wall — 25 lb bags from the area, tile size and joint width, for the Keracolor and Ultracolor lines.
Boxes of flooring for a room — laminate, vinyl plank or hardwood, from the room size and the coverage printed on the box.
Boxes of laminate flooring for a room — plus the underlayment rolls to go under it, from the room size and the coverage on the box.
Floor, wall or room area from length and width — in square feet, square yards and square metres, with a coverage cost estimate for flooring or paint.
Countertop square footage and cost — one or two sections, priced by the material you pick. Prices are typical installed estimates.
Installed carpet cost for a room — the square yards you are buying and a total price by carpet type, with old-carpet removal added if you need it.
What carpet cleaning should cost — an estimate from the carpet area and the cleaning method, with the usual minimum service charge built in.
What sanding and refinishing a hardwood floor should cost — figured on the floor area and rate per square foot, with stairs priced per step.
Thinset mortar for a tile job — 50 lb bags from the area and tile size, with the trowel notch that tile size calls for.
Ceiling tiles for a room — pick 2 × 2 ft or 2 × 4 ft tiles and get the count to buy, for a drop ceiling or a glue-up ceiling.