QuickSiteCalc

Home › Countertop Calculator

Countertop Calculator

Countertop square footage and cost — one or two sections, priced by the material you pick. Prices are typical installed estimates.

Type your numbers — the result updates live.

Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.

Formula

Square feet = length (ft) × depth (in ÷ 12), added over each section  ·  A standard counter is about 25.5 in deep (a 24 in cabinet plus overhang)  ·  Cost = total sq ft × price per sq ft

Solved example

A 10 ft run at the standard 25.5 in depth = 21.25 sq ft. In quartz at a typical $75 per sq ft installed, that is $1,593.75. With a 10% cutting allowance: 23.38 sq ft — about $1,753.

FAQs

Are the material prices real quotes?

No — they are typical installed-price estimates for planning and comparing materials. Real quotes vary a lot with the slab you pick, the edge profile, sink and cooktop cutouts, backsplash and your region — change the price above to any quote you actually get.

How do I measure an L-shaped or U-shaped counter?

Split it into rectangles, one per run, and enter the two runs as Section 1 and Section 2. For a third run, figure it the same way and add its square feet to the total — or fold its length into a section of the same depth.

Does this include the backsplash?

No — the result is the countertop surface only. A standard 4 in backsplash adds length × 4 in of area, and a full-height backsplash is figured like a small wall — you can enter either as a section with its height in the depth box if you want it in the total.