Home › Retaining Wall Calculator
Blocks for a retaining wall — wall blocks, cap blocks and the gravel base, from wall length and height.
Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.
Blocks = wall length × wall height × 3 (standard block face 12 in wide × 4 in high) · Cap blocks = wall length in inches ÷ 16, rounded up · Base gravel = length × 1.5 ft wide × 0.5 ft deep ÷ 27 (cubic yards)
A 10 ft long, 2 ft high wall = 20 sq ft × 3 = 60 blocks. With 10% waste: 66 blocks, plus 9 cap blocks (8 base) and about 0.28 cubic yards of base gravel.
About 6 in of compacted gravel in a trench roughly 1.5 ft wide is a common starting point, and this calculator uses that trench size. Frost depth and local practice may call for more.
No — the gravel figure is the base trench only. Most walls also need drainage gravel behind the first course and a perforated drain pipe, which are figured separately.
Garden walls up to about 2–3 ft are typical DIY territory. Taller walls need a setback per course, engineering and often a permit — check local code.