QuickSiteCalc

Home › Attic Insulation Calculator

Attic Insulation Calculator

Blown-in attic insulation top-up — bags and depth to add to go from your current R-value to the target.

Type your numbers — the result updates live.

Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.

Formula

Added R = target R − current R  ·  Depth to add = added R ÷ 3.0 (blown fiberglass ≈ R-3.0 per inch)  ·  Bags = attic area ÷ coverage per 25 lb bag for that added R (typical chart estimates: added R-11 → 110 sq ft · R-19 → 75 · R-30 → 55 · R-38 → 45 · R-49 → 35) — check the chart on the bag you buy

Solved example

30 × 20 ft attic = 600 sq ft. Going from R-11 to R-49 means adding R-38 — about 12.7 in of blown fiberglass at ~45 sq ft per bag = 14 bags. With 10% waste: 15 bags.

FAQs

What R-value should my attic have?

Many US climate zones call for R-38 to R-60 in attics, with colder zones aiming at R-49 or more. Check your local energy code for the target in your zone before you buy.

How accurate is the bag coverage?

The coverages are typical manufacturer-chart estimates for 25 lb bags of blown fiberglass. Every brand prints its own chart on the bag, and coverage falls as the target depth rises — use the chart on your bag for the final count.

Can I blow new insulation over the old?

Usually yes — blown fiberglass or cellulose goes right over existing insulation as long as it is dry and mould-free. That is exactly what this calculator assumes: a top-up from the current R-value to the target.