Home › Fence Calculator
Posts, sections and rails for a fence — plus the panels or pickets that fill them, by fence length and post spacing.
Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.
Sections = fence length ÷ post spacing, rounded up · Posts = sections + 1 (posts are exact — waste does not apply to them) · Rails = sections × 2 · Pickets = fence length in inches ÷ 6 (5.5 in picket + ½ in gap)
100 ft fence at 8 ft spacing = 13 sections and 14 posts, with 13 panels and 26 rails. With 10% waste: 15 panels. Built with pickets instead: 200 pickets base, 220 with waste.
Every straight run starts and ends with a post, so 13 sections need 14 posts. Corners end a run and start another, and a gate usually wants a heavier post of its own — add those separately.
Posts are set by the layout, not by material loss — you dig exactly one hole per post. Waste applies to panels and pickets, which get cut, and occasionally arrive damaged.
One post-to-post span — a single panel, or the pickets and rails that fill that span. The price per section covers that span's facing material; posts, concrete and hardware vary too much to fold into it.