Home › Drywall Mud Calculator
Joint compound for taping and finishing drywall — gallons and buckets from the total drywall area.
Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.
Gallons ≈ drywall area (sq ft) ÷ 100 — about 1 gallon of premixed compound per 100 sq ft for taping plus two finish coats (a typical estimate) · Buckets (4.5 gal) = gallons ÷ 4.5, rounded up
25 × 20 ft of drywall = 500 sq ft ÷ 100 = 5.0 gallons of premixed compound → 2 × 4.5 gal buckets. With 10% waste: 5.5 gallons — still 2 buckets.
The first (tape) coat embeds the joint tape, the second (fill) coat levels the joint, and the third (finish) coat feathers it wide and smooth. Each coat uses less mud than the one before, and the roughly 1 gallon per 100 sq ft figure covers all three together.
Premixed (in the bucket) is what this calculator figures — convenient and fine for all three coats. Setting compound (the powder you mix, 'hot mud') dries by chemical reaction, shrinks less and is stronger for the tape coat, but it is sold by the bag, not the gallon.
Yes — knockdown, orange-peel and other sprayed textures use extra compound beyond the finishing coats. Add waste with the selector above if you plan to texture.