QuickSiteCalc

Home › Sonotube Calculator

Sonotube Calculator

Concrete for round tube footings (Sonotube-style forms) — cubic yards and 80 lb bags from the tube size, depth and how many footings.

Type your numbers — the result updates live.

Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.

Formula

Volume per tube = π × (diameter ÷ 24)² × depth — the radius in feet is the diameter in inches ÷ 24  ·  Cubic yards = total cu ft ÷ 27  ·  Bags (80 lb) = cu ft ÷ 0.60

Solved example

Four 12 in tubes, 4 ft deep: π × 0.5² × 4 = 3.14 cu ft per tube × 4 tubes = 12.57 cu ft = 0.47 cubic yards = 21 × 80 lb bags. With 10% waste: 0.51 cubic yards = 24 bags.

FAQs

How deep should the tube footing go?

The bottom of the footing must sit below your local frost line, so the depth you enter should reach it — frost depth is published by your local building department. The fence post depth calculator works through the same frost-line rule for fence posts.

Do I fill the whole tube with concrete?

Usually the tube is set in the hole, backfilled around the outside, then filled with concrete to just above ground level so water sheds away from the post or column sitting on it. This calculator figures a full tube — stop a little short and you will use a little less.

What size tube does a deck post need?

The footing size is set by the load it carries and the soil under it, not by the post alone — a 6×6 post often lands on a 12 in or larger footing, but the footing table in your local code (or your inspector) makes the final call. This calculator only figures the concrete volume for the size you enter.