QuickSiteCalc

Home › Block Fill Calculator

Block Fill Calculator

Grout or concrete to fill the cores of a concrete block wall — and the block count itself — by wall size, block size and how many cores get filled.

Type your numbers — the result updates live.

Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.

Formula

Blocks = wall area × 1.125 (every CMU face is 16 × 8 in, whatever the thickness)  ·  Fill volume = blocks × core volume per block × filled fraction  ·  Typical core volumes (estimates): 6 in ≈ 0.20 cu ft · 8 in ≈ 0.27 · 10 in ≈ 0.35 · 12 in ≈ 0.44  ·  Trade rule: about 1 cubic yard fills 100 8-inch blocks with all cores filled

Solved example

A 10 × 8 ft wall = 80 sq ft × 1.125 = 90 blocks. Filling every core of 8 in block: 90 × 0.27 cu ft = 24.3 cu ft = 0.90 cubic yards of grout = 41 × 80 lb bags. With 10% waste: 99 blocks and 0.99 cubic yards of fill.

FAQs

Why fill block cores at all?

Filled cores turn a hollow block wall into a solid one — the grout bonds the vertical and horizontal rebar into the wall, which is what gives reinforced masonry its strength. Building code (and the engineer, where one is involved) decides which cores are filled and where the steel goes.

How accurate are the core volumes per block?

They are typical planning estimates. Real core volume varies with each manufacturer's web and core design — for a big pour, ask your block supplier for their fill chart, or test one block against a measured volume of grout.

Grout or concrete for the fill?

Either is used. Grout is the traditional core fill because it flows readily into the cores and around the steel; a pea-gravel concrete mix is also common. Both are figured by the same volume, which is all this calculator counts.