Home › Polymeric Sand Calculator
Polymeric joint sand for a paver patio or walkway — 50 lb bags from the area and the width of the joints between the pavers.
Price is an editable estimate — change it to your supplier's price. There is no waste factor on this one: the quantity is bought by the bag, so the bag count is simply rounded up. Estimate only, not a quote.
Bags = paver area (sq ft) ÷ coverage per 50 lb bag, rounded up · Typical coverage estimates for standard 4×8 in pavers at 2⅜ in depth: 1/8 in joints ≈ 65 sq ft per bag · 1/4 in ≈ 35 · 3/8 in ≈ 25 · 1/2 in ≈ 18 — the chart on the bag decides
A 200 sq ft patio with 1/4 in joints: 200 ÷ 35 = 5.71 → 6 × 50 lb bags. At $28 per bag that is $168.
The sand fills the whole joint, so doubling the joint width roughly doubles the volume of sand in every square foot of patio. Joint depth works the same way — a thick paver holds noticeably more sand per joint than a thin one.
They are typical estimates for standard 4×8 in pavers at 2⅜ in depth. Bigger pavers have fewer joints per square foot, so a bag covers more; smaller pavers cover less. Every bag prints its own coverage chart, and that chart is the one that decides — check it before the final buy.
No. Bedding sand is the plain sand screeded 1 in thick under the pavers before they are laid — the paver sand calculator figures that layer. Polymeric sand is swept into the joints afterwards and hardens when misted with water, locking the pavers together and keeping weeds and ants out of the joints.