Home › Carpet Cleaning Cost Calculator
What carpet cleaning should cost — an estimate from the carpet area and the cleaning method, with the usual minimum service charge built in.
Price is an editable estimate — change it to your supplier's price. There is no waste factor on this one: the quantity is bought by the bag, so the bag count is simply rounded up. Estimate only, not a quote.
Cost = area (sq ft) × price per sq ft — but never less than the minimum service charge (about $120 is typical) · Typical per-sq-ft price estimates: steam cleaning ≈ $0.35 · dry cleaning ≈ $0.45 · deep / shampoo cleaning ≈ $0.40
500 sq ft of carpet steam cleaned at $0.35 per sq ft: 500 × $0.35 = $175.00 — above the minimum, so that is the estimate. A small 200 sq ft job works out to $70 at the rate, so the $120.00 minimum service charge is what you would actually pay.
A cleaning company's real costs — travel, setup, machine time — barely change between one small room and a whole floor of carpet, so most set a minimum service charge, commonly around $100–$150. This calculator uses $120: whenever the area × rate figure falls below it, the minimum becomes the estimate.
Steam cleaning (hot water extraction) is the standard deep clean, and the one most carpet makers recommend for warranty care. Dry cleaning uses very little moisture, so the carpet is walkable again within an hour or two — useful for offices and moisture-sensitive fibres, at a slightly higher rate. Deep or shampoo cleaning sits between the two and suits heavily soiled carpet.
Stairs are usually priced per step, stain and pet-odour treatments are add-ons, and moving furniture may be charged or declined. The per-sq-ft rates here are typical estimates for open carpet area — change the rate to any quote you actually get.