QuickSiteCalc

Home › Drywall Calculator

Drywall Calculator

Drywall sheets for a room — walls, the ceiling, or both, in 4×8 or 4×12 sheets, plus a rough compound estimate.

Type your numbers — the result updates live.

Price is an editable estimate — change it to your supplier's price. Cost = total quantity (with waste) × your price. Estimate only, not a quote.

Formula

Wall area = 2 × (length + width) × ceiling height  ·  Ceiling = length × width (if included)  ·  Sheets = area ÷ sheet size (4×8 = 32 sq ft · 4×12 = 48 sq ft), rounded up  ·  Joint compound ≈ 1 gallon per 100 sq ft (rough estimate)

Solved example

12 × 10 ft room with 8 ft ceilings: walls 2 × (12 + 10) × 8 = 352 sq ft, plus the 120 sq ft ceiling = 472 sq ft = 15 sheets of 4×8. With 10% waste: 17 sheets. Joint compound: about 4.7 gallons.

FAQs

Should I use 4×8 or 4×12 sheets?

4×12 sheets leave fewer seams to tape on long walls and ceilings, but they are heavier and awkward to move through a house — most DIY rooms are hung with 4×8.

How accurate is the compound estimate?

Rough — about a gallon of premixed compound per 100 sq ft of board is a common planning figure for taping and two finish coats, but it varies with how many joints there are and how thick you spread it.

Does this include screws and tape?

No — sheets and compound only. Screws and paper or mesh tape are figured separately; a common allowance is roughly 1 lb of screws per 200 sq ft of board.